UCR CS 61: Computer Organization & Assembly Language

Summer Sesion II, 2004


Lecture Schedule   Lab Schedule   Turnin   Previous CS61's  

Overview

In this course we start with transistors, logic gates, latches, logic structures, and memory circuits. We cover the von Neumann model of computing, and then use all these tools to understand thoroughly the Instruction Set Architecture of a simple computer, the LC-3. This leads on to assembly language programming of the LC-3.

Catalog description : Lecture, three hours / week; laboratory, three hours / week.
Prerequisite: CS10

Basic information

Class communications ALL communication with the class will be via the CS61 mailing list - so be sure to read your mail regularly
All course assignments and other material will be posted to this site.
Your grades will be posted to www.ilearn.ucr.edu
Enrolling in this course gives you automatic access to the UCR "ilearn" site: your login id is the name part of your ucr student email address, and your initial password is your Student ID (no dashes or spaces).

Instructor : Dr. Brian Linard (blinard@cs.ucr.edu)
Office hours: Tuesday 2:00 to 6:00 pm (by appointment)
Office: Surge Bldg. 340.

Teaching Assistants and office hours: Jia Yu jiayu@cs.ucr.edu

Office hours held in Surge Bldg. 282.

Lectures: MTWR 9:40 to 11:10 am
OLMH. 1212

Labs: Lab attendance is mandatory. Plan to stay in the lab for the entire lab session, working on material related to this course.

MW 1:00 to 4:00 pm, S283

Text Book: Introduction to Computing Systems , 2nd edition, by Patt & Patel (McGraw-Hill)
ISBN 0-07-246750-9

Course grading: Letter grades are assigned (approximately) according to the usual 90/80/70/60 scale out of 100 total course points, with 90 and above corresponding to an A, 80 and above to a B, 70 and above to a C, 60 and above to a D, and less than 60 to an F. +/- grades will likely be given. A+'s will be given to students in the high 90's who also have turned in all required material and many of the challenge Lab excercises. The course is divided into two grading components, combined as a weighted sum to total 100 points:
65: Theory component (mostly Machine Organization): 10: Quizzes (expect a 10 - 15 min. quiz each Tuesday and Thursday)
  5: Homeworks
25: Midterm exam
25: Final exam
35: Practical component (mostly Assembly Language Programming): 10: Lab programming exercises and attendance
  5: Lab practical exams
20: Home programming assignments

To ensure minimum competency in successive courses requiring a C- or better in this course, the following grading scheme will be used: a C- minimum in both components is necessary to achieve a C- minimum for the final course grade, regardless of the components' weighted sum; otherwise, the final course grade will be no greater than a D+. For example, a B in the practical component and a D in the theory component might yield a weighted sum of a C, but would instead result in a final course grade of D.

Approximate Time Requirements: This is a four-unit CS course. As such, you should expect to spend the following approximate amount of time: 3 hours/week in lecture
3 hours/week in lab
5 to 10 hours/week doing individual study (readings, homework, programming, lab preparation, etc).
Please don't underestimate the time you will need to spend on this course. These are real time amounts spent by average successful past students. Computer Science and Engineering are challenging disciplines requiring extensive time to master.

Lecture schedule

Subject to change as the quarter progresses.
Read the book before lecture! Reading ahead is one of the most effective ways of doing better in class -- you'll be amazed how much more comprehensible and useful the lectures will be.

Submission due times

Lab schedule

Subject to change as the quarter progresses.

General course policies

Lab guidelines

Electronic assignment turn-in

Anonymously report suspected cheating

Additional Resources